OpenPlant Isometrics Manager Help

Isometric Style Configuration - Converter Settings

The configurations in this option are shown below.
SettingDescription
North Direction At the top left corner of an isometric drawing, there is an arrow showing north direction. Use this option to define the direction. Click Change to change the direction of arrow.
Label Formats These fields define annotation labels that are displayed on the completed isometric drawing.
Place Diameter Labels Determines whether pipe diameter labels are placed on isometric.
  • Checked: Labels are placed
  • Unchecked: Labels are not placed.
Place Diameter Change Labels Determines whether a label is placed to mark a change in pipe diameter.
  • Checked: Labels are placed
  • Unchecked: Labels are not placed.
Fit To Page Determines whether isometric uses the Fit to Page zoom option.
  • Checked: Fit to Page is used to view isometric.
  • Unchecked: Fit to Page option is not used.
Minimum Pipe Length (mm) Minimum permitted pipe length while showing Isometric drawing. This value is expressed in (mm).
When finished making any changes in the fields, click Save to apply the changes.
The Undo button will undo any changes made.
Note: The Save and Undo buttons only enable when changes are made.
Parent topic: Isometric Style Configuration